Manualshelf

Ascentâ„¢ Multi View BHD4 Manual

ManualsBrandsNapoleon ManualsFireplacesNapoleon 30000 BTU Built In Direct Vent Natural Gas Peninsula Fireplace with Safety Barrier and Glass Topaz Ember Set from the Ascent Series
51525354555657585960
W415-1285 / A / 11.03.14
53
EN
10.4.4 SHIPPING BRACKET REMOVAL
A. Remove the door(s), refer to "DOOR REMOVAL / INSTALLATION" section for instructions.
B. Cut the strap holding the glass and vent thimble in place.
C. Remove the 2 screws holding the shipping bracket / vent shield in place, as shown.
NOTE: The 2 screws removed from the shipping bracket / vent shield MUST be replaced.
10.4.3 CRADLE BURNER REMOVAL
A. Remove the door(s) refer to the "DOOR REMOVAL/INSTALLATION" section for instructions.
B. Carefully remove the glass or rocks from the appliance.
C. To remove the media tray from the appliance lift the media tray and the media shelf up and out of the
appliance. The media tray and media shelf are secured together and resting loose in the fi rebox.
D. Remove the 4 screws securing the burner in place, as shown below. Then slide the burner off the the
orifi ce and remove from the appliance.
E. To reinstall the burner reverse these steps. NOTE: When reinstalling the burner ensure that the
venturi rests on the orifi ce.
C
MEDIA
TRAY
MEDIA
SHELF
D