Installation Manual

2
W415-1285 / F / 12.21.16
EN
TABLE OF CONTENTS
1.0 INSTALLATION OVERVIEW 3
2.0 INTRODUCTION 4
2.1 DIMENSIONS 5
2.2 GENERAL INSTRUCTIONS 6
2.3 GENERAL INFORMATION 7
2.4 RATING PLATE / LIGHTING INSTRUCTION LOCATION 8
3.0 VENTING 9
3.1 VENTING LENGTHS AND COMPONENTS 10
3.2 TYPICAL VENT INSTALLATIONS 11
3.3 SPECIAL VENT INSTALLATIONS 12
3.3.1 PERISCOPE TERMINATION 12
3.3.2 REDUCED VENT CLEARANCE TO COMBUSTIBLES 12
3.4 CONVERTING FROM 5/8" TO 4/7" VENTING 13
3.5 VENT TERMINAL CLEARANCES 14
3.6 VENT APPLICATION FLOW CHART 15
3.7 DEFINITIONS 15
3.8 ELBOW VENT LENGTH VALUES 15
3.9 HORIZONTAL TERMINATION 16
3.10 VERTICAL TERMINATION 18
4.0 INSTALLATION 20
4.1 WALL AND CEILING PROTECTION 20
4.1.1 HORIZONTAL INSTALLATION 21
4.1.2 VERTICAL INSTALLATION 21
4.2 USING FLEXIBLE VENT COMPONENTS 22
4.2.1 HORIZONTAL AIR TERMINAL INSTALLATION 23
4.2.2 VERTICAL AIR TERMINAL INSTALLATION 24
4.2.3 APPLIANCE VENT CONNECTION 24
4.3 GAS INSTALLATION 25
4.4 MOBILE HOME INSTALLATION 25
4.5 ACCESS PANEL FOR GAS LINE CONNECTION 26
5.0 FRAMING 27
5.1 FRAMING 28
5.1.1 SEE-THRU FRAMING (BHD4ST) 28
5.1.2 PENINSULA FRAMING (BHD4P) 28
5.2 MINIMUM CLEARANCE TO COMBUSTIBLE ENCLOSURES 29
5.2.1 SEE-THRU (BHD4ST) 29
5.2.2 PENINSULA (BHD4P) 29
5.3 INSTALLING COMBUSTIBLE BOARD 30
5.3.1 FINISHING SUPPORT ADJUSTMENT 31
5.4 NON-COMBUSTIBLE FACING MATERIAL 32
5.5 ALCOVE ENCLOSURE 33
5.6 MINIMUM MANTEL CLEARANCES 33
5.7 NAILING TAB INSTALLATION 34
6.0 FINISHING 34
6.1 MAIN SAFETY SCREEN REMOVAL / INSTALLATION 34
6.2 END SAFETY SCREEN REMOVAL / INSTALLATION (BHD4P ONLY) 35
6.3 MAIN DOOR REMOVAL / INSTALLATION 36
6.4 END DOOR REMOVAL / INSTALLATION (BHD4P ONLY) 37
6.5 CONTROL PANEL REMOVAL 37
6.6 HEARTH PAD INSTALLATION 38
6.7 LOG PLACEMENT 38
6.7.1 GLOWING EMBERS 40
6.7.2 CHARCOAL EMBERS 40
6.7.3 CHARCOAL LUMPS 40
6.8 GLASS MEDIA INSTALLATION 41
6.9 LOGO PLACEMENT 42
7.0 WIRING DIAGRAM 42
7.1 RECEPTACLE WIRING DIAGRAM 42
7.2 ELECTRONIC WIRING DIAGRAM 42
7.2.1 WIRING REQUIREMENTS 43
7.3 BATTERY BACK-UP INSTALLATION 44
8.0 OPERATING INSTRUCTIONS 45
8.1 OPERATING INSTRUCTIONS - FOR YOUR SAFETY READ BEFORE OPERATING 45
8.2 LIGHTING INSTRUCTIONS 45
8.3 ANTI CONDENSATION SWITCH 46
9.0 ADJUSTMENT 47
9.1 PILOT BURNER ADJUSTMENT 47
9.2 VENTURI ADJUSTMENT 47
9.3 FLAME CHARACTERISTICS 48
10.0 MAINTENANCE 49
10.1 ANNUAL MAINTENANCE 50
10.2 GLASS / DOOR REPLACEMENT 50
10.3 CARE OF GLASS 51
10.4 SHIPPING BRACKET 51
10.5 BURNER REMOVAL 52
10.5.1 LOG BURNER REMOVAL 52
10.5.2 GLASS BURNER REMOVAL 52
10.5.3 CRADLE BURNER REMOVAL 53
10.6 VALVE TRAIN REPLACEMENT 53
10.7 RESTRICTING VERTICAL VENTS 53
The camera icon indicates video tutorials are available as additional reference,
visit http://mynapoleon.napoleonproducts.com/download/index/44/1