Installation Manual

32
W415-1285 / F / 12.21.16
EN
DOOR
TOP OF
APPLIANCE
4” (101.6mm)
6” (152.4mm)
2” (50.8mm)
0” (0mm)
5” (127mm)
3”(76.2mm)
71.6
NON-COMBUSTIBLE FACING MATERIAL
WARNING: Non-combustible facing material must not project more than 4” (101.6mm) from the face of the
door (all four sides). If greater projections are desired, increase the clearance to the sides and top by 2”
(50.8mm) for every additional 1” (25.4mm) of projection. If using an optional surround, the same rule applies,
starting from the top of the surround. Ensure clearances are maintained for surround removal, as it must lift
off the appliance for maintenance.
DOOR
OPTIONAL
SURROUND
TOP OF
APPLIANCE
4” (101.6mm)
6” (152.4mm)
2” (50.8mm)
0” (0mm)
5” (127mm)
3”(76.2mm)
B
B
A
A
SECTION A - A SECTION B - B
DOOR
TOP OF
APPLIANCE
4” (101.6mm)
6” (152.4mm)
2” (50.8mm)
0” (0mm)
5” (127mm)
3”(76.2mm)
71.6
NON-COMBUSTIBLE FACING MATERIAL
WARNING: Non-combustible facing material must not project more than 4” (101.6mm) from the face of the
door (all four sides). If greater projections are desired, increase the clearance to the sides and top by 2”
(50.8mm) for every additional 1” (25.4mm) of projection. If using an optional surround, the same rule applies,
starting from the top of the surround. Ensure clearances are maintained for surround removal, as it must lift
off the appliance for maintenance.
DOOR
OPTIONAL
SURROUND
TOP OF
APPLIANCE
4” (101.6mm)
6” (152.4mm)
2” (50.8mm)
0” (0mm)
5” (127mm)
3”(76.2mm)
B
B
A
A
SECTION A - A SECTION B - B
FRONT OF
APPLIANCE
4" (102mm)
5.4 NON-COMBUSTIBLE FACING MATERIAL