Operation Manual

21
www.napoleongrills.com
EN
BIPRO500 BUILT-IN INSTRUCTIONS
WARNING! Failure to follow these instrucons could result in property damage, personal injury or
death.
The grills electrical systems are pre assembled in an electrical box which must be mounted a minimum
of 4” (102 mm) below the boom of the grill as illustrated. Fasten the electrical box to the inside of the
enclosure, making sure the venlaon holes are not obstructed.
Plug the power supply into a Ground Fault Interrupter (GFI) protected circuit. Never remove the the
grounding plug or use with an adapter of 2 prongs.
102mm minimum
203mm
maximum
178mm
244mm
GFI Outlet
LOCATED INSIDE CABINET