GD19 Manual
W415-1351 / 08.29.14
21
EN
3.11 REAR VENT CONVERSION
In order to convert the venting confi guration from a top exit to a rear exit, remove components as illustrated:
When reinstalling in the alternate position: Check gaskets for tears, replace if necessary to ensure a
proper seal.
4" (102mm) Collar
4'' (102mm) Gasket
7" (178mm) Collar
7"(178mm) Gasket
4'' (102mm) Gasket
4'' (102mm) Cover Plate
7'' (178mm) Gasket
7'' (178mm) Cover Plate
7'' (178mm) Top Access Plate
Outer Top