GD19 Manual
W415-1351 / 08.29.14
39
EN
A. Remove the safety screen and glass door, refer to "SAFETY SCREEN & GLASS DOOR" section.
B. Install the side brackets, ensure the front face is on a soft surface to avoid any damages during bracket
instalation, see Figure 1.
C. Install the safety screen, spline up, see Figure 2.
D. Install the decorative facing trim as shown in Figure 3.
E. Place the front facing onto the appliance and install the rest of the top trim and control panel as shown in
Figure 4.
THE COMPONENTS IN THIS KIT ARE HEAVY, USE CARE WHEN LIFTING AND ENSURE THEY ARE
FIRMLY SECURED ONCE INSTALLED.
THIS FRONT FACING DOES NOT REPLACE THE MAIN GLASS DOOR. DO NOT OPERATE WITHOUT
THE MAIN GLASS DOOR INSTALLED.
THE FRONT FACING CAN SIT FLUSH WITH A COUNTER, FLOOR, OR HEARTH.
!
WARNING
FIG. 1
SCREEN
SAFETY
FIG. 2
W565-0094
W715-0745
W
565
-
009
4
W565-0094
W71
5
-
0
74
5
W715-0745
FIG. 3
8.0 FINISHING
8.1 FRONT FACING KIT INSTALLATION