Oakville 3 3E G3 X3 Installation Manual

W415-4001 / 08.11.21
EN
14
fi nishing
3.3 log placement
!
WARNING
• Failure to position the logs in accordance with these diagrams or failure to use only logs specifi cally approved
with this appliance may result in property damage or personal injury.
• Logs must be placed in their exact location in the appliance. Do not modify the proper log positions, since
appliance may not function properly and delayed ignition may occur.
• The logs are fragile and should be handled with care.
If applicable, insert the following statement:
“PHAZER™ logs [and glowing embers], exclusive to Napoleon/Continental, provide a unique and realistic
glowing effect that is different in every installation. Take the time to carefully position the glowing embers for a
maximum glowing effect. Log colours may vary. During the initial use of the appliance, the colours will become
PHAZER™ log and glowing embers, exclusive to Wolf Steel Ltd., provide a unique and realistic glowing effect
that is different in every installation. Take the time to carefully position the glowing embers for a maximum glowing
effect. Log colours may vary. During the initial use of the appliance, the colours will become more uniform as
colour pigments burn in during the heat-activated curing process.
note:
Log numbers are located on the bottom or back of the logs.
Log Number Part Number Description
1 W135-0778 Rear log
2 W135-0779 Right log
3 W135-0780 Left log
4 W135-0782 Left crossover log
5 W135-0781 Right crossover log
6 W135-0783 Left charcoal log
7 W135-0784 Center charcoal log
8 W135-0785 Right charcoal