Installation Manual

It’s important to periodically perform a visual check of the pilot and burner
ames. Compare them to the illustrations provided. If any ames appear
abnormal call a service person.
54.3
9.3 FLAME CHARACTERISTICS
9.4 ANTI CONDENSATION SWITCH
This appliance has the option to change from an
electronic intermittent pilot ignition (IPI) to a standing
pilot for cold climates. The anti condensation control
(standing pilot) is located in the center of the control
panel. Using your nger, ip the switch up for
standing pilot, or down for intermittent pilot ignition.
CONTROL
PANEL
OPTIONAL ANTI CONDENSATION
SWITCH (ACS)
Turning the ACS switch on will allow the pilot
ame burning to burn continuously. This mode will
minimize the condensation which forms on the inside
of the glass when the main burner is rst turned on.
It will also help the replace and vent system more
quickly during the colder winter months.
During the warmer winter and summer months,
the ACS switch can be turned off to minimize fuel
consumption.
W415-1332 / A / 11.21.14
33
EN