Installation Sheet

www.napoleongrills.com
16
EN
Conversion to LP (Propane) Gas
WARNING! To avoid the possibility of burns conversions should only be done when the appliance
is cool. Ensure the burner is turned o. Turn the gas o at source and disconnect the appliance before
beginning conversion.
WARNING! Glass embers may have sharp edges wear safety glasses and gloves when handling.
WARNING! This conversion must be performed by a licensed gas er, and all connecons must
be leak tested before operang the appliance.
Your replace can be easily converted to LP (Propane) Gas by following these steps:
1. Remove the glass embers from the tray.
2. Remove the glass tray from the replace by removing the (8) screws that hold the tray in place.
3. Carefully li the glass tray from the replace and set aside. Take care not to damage or kink the
thermocouple wire.
4. Disconnect the stainless steel ex connector from the orice using (2) wrenches.
5. Unscrew the natural gas orice from the inside of the burner as illustrated.
6. Replace the natural gas orice with the LP (Propane) orice supplied.
Note: The air shuer has been factory set and does not need to be adjusted.