Installation Sheet

www.napoleongrills.com
9
EN
Minimum Enclosure Clearances
WARNING! Use only non-combusble materials such as steel studs, cement board, ceramic le,
marble, paint etc. When adding nishing materials to the appliance. Do not use wood or drywall.
WARNING! You must have clear and easy access to the on/o valve AFTER the appliance is installed
and connected to the gas supply in order to safely turn o the burner.
GSS48
Appliance may be
placed at any height
including directly
on the oor with
provisions for gas and
electrical connecons.
6 5/16”
(160mm)
6”
(152mm)
6”
(152mm)
16 1/2”
(419mm) (VA)
Nailing Tabs (4 per side)
6” (152mm)
(Minimum
clearance to
combusbles)
1 1/2”
(38mm)
50 3/4” (1289mm)
(Including 1/8” (3mm)
clearance per side)
47 1/2” (1207mm)
(Viewing Area (VA)
Gas and electrical lines protude from the
boom of the appliance located on the
right side.
All material in shaded
area must be Non
Combusble. (including
framing, sheeng and
nishing materials).
NON COMBUSTIBLE
All material in shaded
area must be Non
Combusble. (including
framing, sheeng and
nishing materials).
36”
(914mm)
minimum
to ceiling.
24 3/4” (629mm)
Including 1/8”
(3mm) clearance
per side.
16 1/2”
(419mm) (VA)
36”
(914mm)
NON COMBUSTIBLE