Owners Manual
7
www.napoleongrills.com
3. The supply can feed either into the side of the burner base, or is fed from below the base. The gas line
needs to be disconnected from the gas valve and reconnected in order to do this. This must be done by
a licensed gas er and the connecons need to be leak tested according to the leak tesng instrucons
before using the unit.
4. The burner unit can be built into a non-combusble enclosure. The control module can be removed from
the burner unit and located up to 12” away from the burner unit. A cap is provided to close the opening in
the side of the burner module. The gas line needs to be disconnected and reconnected in order to do this.
This must be done by a licensed gas er and the connecons need to be leak tested according to the leak
tesng instrucons before using the unit.
4 x N570-0013
The gas supply is shown entering
the boom of the burner.
The gas supply is shown entering
the side of the burner.
Removing Control Panel