Owner's Manual

EN
12
installation
A. Remove the front surround (see “front surround removal / installation” section).
B. Place appliance on a soft clean surface.
C. Remove the four screws from the bottom of the appliance (Fig. 3-3). Set screws aside.
D. Align the center stand piece to the bottom holes and secure it into the appliance using the screws
previously removed in step D (Fig. 3-4).
E. Prepare the glass base, ensuring that the rubber feet of the glass base are facing away of the appliance.
F. Secure the glass base into the center piece using 5 screws (supplied) (Fig. 3-5).
G. Check if the glass stand is secured properly. Ensure appliance is standing straight and still (Fig. 3-6).
H. Install media (see “fi nishing” section).
I. Reinstall the front surround.
Fig. 3-3
X5
X1
X1
3.2.2 optional glass stand
Fig. 3-4
Fig. 3-5
Fig. 3-6
A
D
E