Installation & User Manual

EN
W415-1980 / 06.20.19
17
operating instructions
5.2 operating remote control
Power
Turns the appliance on / off.
Timer
Turns the timer on /off.
10 Settings: -- (no setting), 30 min., 1h, 2h, 3h, 4h, 5h, 6h, 7h, 8h
Temperature
Control
Controls the appliance temperature.
11 Settings:
NOTE: When setting is °C or °F, the temperature control is OFF.
Holding the button for 5s will switch the temperature from °C to °F
and vice versa.
Flame
Controls the fl ame brightness.
5 Settings:
F0 - Flame off
F1 - Small fl ame
F2 - Medium fl ame
F3 - Bright fl ame
F4 - Brightest fl ame
Top
Light
Controls the top light colour.
8 Settings:
d1 - Yellow, red, and blue
d2 - Red and blue
d3 - Yellow and blue
d4 - Yellow and red
d5 - Blue
d6 - Red
d7 - Yellow
d0 - Off
Brightness
Controls the ember bed brightness.
6 Settings:
b0 - No brightness
b1 - Low
b2 - Medium
b3 - Bright
b4 - Brightest
b5 - Pulsing effect (fade in and out)
Heater
Turns the heater and blower on / off.
3 Settings:
H0 - Heater and blower off
bL - Blower on
H1 - Heater on
NOTE: Heater function can be disabled / enabled by holding the
button for 5s. When the heater function is disabled, "LO" will be
displayed.
°C 18 19 20 21 22 23 24 25 26 27
°F 64 66 68 70 72 74 76 78 80 82
When operating the remote control, it must be directed towards the front centre of the appliance.
note: