SDS

1047375 - MITSUBISHI Li-Mn Button Cell CR2025
Revision Date 8-Apr-2015
_
____________________
_
_
______________________________________________________________________
_
____________________________________________________________________________________________
Page 5 / 12
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Personal Precautions
A
void contact with skin, eyes or clothing. Ensure adequate ventilation. Use personal
protective equipment as required. Avoid generation of dust. Do not breathe dust. Evacuate
personnel to safe areas.
Other Information
Refer to protective measures listed in Sections 7 and 8.
Environmental Precautions
Environmental Precautions
Refer to protective measures listed in Sections 7 and 8. Prevent further leakage or spillage
if safe to do so.
Methods and material for containment and cleaning up
Methods for Containment
Prevent further leakage or spillage if safe to do so.
Methods for cleaning up
Pick up and transfer to properly labeled containers.
7. HANDLING AND STORAGE
Precautions for safe handling
Handling In case of rupture. Handle in accordance with good industrial hygiene and safety practice.
Use personal protection equipment. Avoid contact with skin, eyes or clothing.
Conditions for safe storage, including any incompatibilities
Storage
Keep containers tightly closed in a dry, cool and well-ventilated place. Keep out of the reach
of children. Store locked up.
Incompatible Products
Strong acids. Strong oxidizing agents. Strong bases.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Exposure Guidelines
Chemical Name ACGIH TLV OSHA PEL NIOSH IDLH
Manganese dioxide
1313-13-9
TWA: 0.02 mg/m
3
Mn
TWA: 0.1 mg/m
3
Mn
(vacated) Ceiling: 5 mg/m
3
Ceiling: 5 mg/m
3
Mn
IDLH: 500 mg/m
3
Mn
TWA: 1 mg/m
3
Mn
STEL: 3 mg/m
3
Mn