Warranty

W415-2212 / E / 06.27.18

installation

4.5 120V hard wiring installation

If it is necessary to hard wire this appliance, a qualiﬁed electrician must remove the cord connection and wire the

appliance directly to the household wiring. The wire and power supply breaker must be rated for 120V minimum

15 amps.

This appliance must be electrically connected and grounded

in accordance with local codes if hard wired. In the absence

of local codes, use the current CSA C22.1 Canadian

Electrical Code in Canada or the current ANSI/NFPA 70

National Electrical Code in the United States.

Before hardwiring the appliance, remove the junction box

control cover by removing the fasteners as shown.

WARNING

• Turn off the appliance completely and let cool before servicing. Only a qualiﬁ ed service person should service

and repair this electric appliance.

There are 6 wires from the appliance junction that connect to 120V power supply (breaker panel): 1 white

(neutral), 2 yellow (heater & neutral), 1 black (power L1), and 1 green (ground). Do NOT connect red wire to

power supply (breaker panel).

note:

BLACK (L1)

WHITE (N)

YELLOW (N1)

YELLOW (N2)

GREEN (G)

(G)

Jumper

(N)

(L1)

RED (L2)

4.5.1 NEFL42 / 50 / 60 / 74 / 100CHD 120V hardwiring

Use 2 wire jumpers

to connect N to N1

and N2.