Use and Care Guide

W415-1454 / C / 02.23.16

A. Once the rough opening has been

prepared, and the power has been

routed to the right side of the recess,

the appliance may be installed.

B. The electrical connection must be

made prior to placing the appliance

into position. (See "HARD WIRING

INSTALLATION" section).

Prepare rough in framing following the recommended dimensions in Figure 1. For the corner rough in framing,

follow the recommended dimension in Figure 2.

Select a location that is not prone to moisture and is located at least 36" (914mm) away from combustible

materials such as curtain drapes, furniture, bedding, paper etc.

NEFB24H NEFB27H NEFB29H

A 9" (229mm) 10" (254mm) 10" (254mm)

B 23" (584mm) 26" (660mm) 28" (711mm)

C 17 1/4"

(438mm) + F

18 1/4"

(463mm) + F

19 3/4"

(502mm) + F

J 41"

(1041mm)

44" (1118mm) 46" (1168mm)

K 29" (736mm) 31 1/2"

(800mm)

32 1/2"

(826mm)

L 29" (736mm) 31 1/2"

(800mm)

32 1/2"

(826mm)

FLOOR

(Or mantel base thickness)

Fig. 1

Fig. 2

3.3 FRAMING