Manualshelf

Installation Guide

ManualsBrandsNapoleon ManualsFireplacesNapoleon 8,000 - 40,000 BTU Pellet Insert with 45 Lb. Hopper
31323334353637383940
W415-0702 / 10.30.08
31
8.6 INSTALLING A ThERmOSTAT
An optional millivolt thermostat is available to help keep the room temperature constant.
NOTE: The thermostat must be installed by a qualified installer.
● Disconnect the power supply.
● Remove the right side panel to gain access to the rear of the control panel.
● Strip and connect the thermostat wires to the green screw terminals on the back of the control panel.
NOTE: The control must be in either T-STAT or AUTO to control the heater with a thermostat.
GREEN SCREW
TERMINALS
TP - INSTALLING A THERMOSTAT_PELLET
FIGURE 8.6
8.6.1
8.6.2
8.6.3