Owner Manual

www.napoleongrills.com
10
EN
Conversion to Natural Gas
WARNING!


WARNING!
WARNING!


1. Remove the glass embers from the burner.
2. Remove the burner from the enclosure. Take care not to damage or kink the thermocouple wire.
3. Disconnect the stainless steel ex connector from the orice using (2) wrenches.
4. Unscrew the propane orice from the inside of the burner as illustrated.
5. Replace the propane orice with the natural gas orice supplied.
: The air shuer has been factory set and does not need to be adjusted.
KENS1 (GPFR)
KENS2 (GPFS)
KENS3 (GPFC40)
KENS1 (GPFR)
KENS2 (GPFS)
KENS3 (GPFC40)