Warranty

CAUTION!

During unpacking and assembly we recommended you wear work gloves and safety glasses

for your protecon. Although we make every eort to make the assembly process as problem free and

safe as possible, it is characterisc of fabricated steel parts that the edges and corners might be sharp and

could cause cuts if handled incorrectly.

Geng Started

1. Remove all cart panels, hardware, and grill head from carton. Raise lid and remove any components

packed inside. Use the parts list to ensure all necessary parts are included.

2. Do not destroy packaging unl the grill has been fully assembled and operates to your sasfacon.

3. Assemble the grill where it is to be used, lay down cardboard or a towel to protect parts from being lost or

damaged while assembling.

4. Most stainless steel parts are supplied with a protecve plasc coang that must be removed prior to us-

ing grill.

5. Follow all instrucons in the order that they are laid out in this manual.

6. Two people are required to li the grill head onto the assembled cart.

If you have any quesons about assembly or grill operaon, or if there are damaged or missing parts please

call our Customer Care Department at 1-866-820-8686 between 9 AM and 5 PM (Eastern Standard Time).

TOOLS REQUIRED FOR ASSEMBLY (tools not included)

2. Caster/Bracket Installaon

Aach (4) casters, using (4) ¼ -20 x 3/8” screws and (4) ¼ -20 lock nuts for each cas

ter. Aach brackets under front casters as

illustrated. Tighten securely.

1. Magnet Installaon

Snap magnet into slot in front of boom shelf.

3/8“ (10mm)

Flat and Philips

screwdrivers

Pliers

Wrench,

ratchet or driver

Hammer