- narda USER'S GUIDE sensor 8718B

45Chapter 8 Data Logging
To initiate one of the three logging modes described
above...
1. Access the menu system by pressing the function key
that corresponds to the legend below MENU on the
bottom line of the display.
2. Press the number 1 on the keypad to select DATA
LOG from the First Menu Screen.
3. A new menu will appear, presenting the three logging
modes. If any of the three logging modes is currently
active, the line showing that option will be flashing.
4. To review the available memory before beginning to
make logged measurements, press F2 (MEM).
5. A screen will appear showing the approximate amount
of available memory and the amount of memory
already used. The bar graph is a rough indicator of
remaining memory capacity as a percentage of total
capacity. See Memory Capacity at the end of this
chapter for information on how to determine the number
of additional measurements that can be stored.
6. Press Esc to return to the logging menu screen.
7. To turn off the logging feature, press F4 (QUIT).
If you access the
menu system from
the Opening Menu
Screen, you will re
-
turn to that screen.
Once a probe has
been selected and
zeroed, the measure
-
ment screen will re
-
flect the logging
mode that you have
selected.
Note
1LOGWITHREF #
2LOGAVGWITHREF#
3 CONT I NUOUS LOGG I NG
MEM QU I T
F1 F2 F3 F4
AILALB
ORY
10 B AVAI
L, 15
Bkk
SED
MENU QUIT
AV
F1 F2 F3 F4
U
EM
EM