User manual

19
MAINTENANCE
Unplug the appliance before carrying out any
maintenance operation.
Periodic cleaning
Clean the inside with warm water and bicarbonate
of soda.
Rinse and dry thoroughly.
Periods of non-operation
When the appliance is not in use for long periods,
take the following precautions:
remove the plug from the wall socket;
remove all food;
defrost and clean the interior and all accessories;
leave the door ajar to allow air to circulate to
prevent unpleasant smells.
Interior light
The light bulb inside the refrigerator compartment
can be reached as follows:
- unscrew the light cover securing screw.
- unhook the moving part as shown in the figure.
Fig. 10
D731
CUSTOMER SERVICE AND SPARE PARTS
If the appliance is not functioning properly, check
that:
the plug is firmly in the wall socket and the mains
power switch is on;
there is an electricity supply (find out by plugging in
another appliance);
the thermostat knob is in the correct position.
If there are water drops on the bottom of the
cabinet, check that the defrost water drain opening
is not obstructed (see “Defrosting” section).
If your appliance is still not working properly after
making the above checks, contact the nearest
service centre.
To obtain fast service, it is essential that when you apply
for it you specify the model and serial number of your
appliance which can be found on the guarantee
certificate or on the rating plate located inside the
appliance, on the bottom left-hand side.