Mapping 1. Long press the home button on the base station to start the mapping. 2. The robot scans all rooms along the contour of the room to create a map of the entire house. 3. After mapping, the robot will return to the base station for room division and charging. Note: 1. The robot needs to install the sweeping module for mapping. 2. The robot must be in the base station before mapping starts. 3.
Vacuuming Mopping 1. Install the sweeping module. 2. Short press the start button on the base station or on the robot to start vacuuming. 3. After vacuuming, the robot will automatically return to the base station for charging. 1. Install the mopping module. 2. Short press the start button on base station or robot to start mopping. 3. During mopping, the robot will automatically return to the base station to wash the mop to keep it clean. 4.
Cleaning path Vacuuming path Mopping path 2 1 3 The robot will clean from the room of base station for vacuuming by default. 20 2 3 1 To avoid secondary contamination, the robot will clean from the farthest room for mopping by default.
Clean along the edges Zigzag cleaning 1. The robot will clean along the walls of the room first. 2. After step 1, the robot will clean the room in a zigzag way.
Maintenance-Robot Dust box - It is recommended to clean the dust bin after vacuuming 1. Pull the handle to take out the dust bin. 22 2. Open the buckle of dust bin to empty the dirt inside. 3. Install the dust bin and press the handle.
Filter It is recommended to clean the filter once every two weeks 1. Open the buckle to take out the filter. 2. Rinse the filter and use the bird knife to clean, let it air-dry after cleaning. 3. Put the filter back and buckle to the dust bin. Note: after washing, the filter should be air-dried for 24 hours before use. It is recommended to use two filters alternately.
Maintenance-robot It is recommended to clean the omni-directional wheel once a month. 1. Take out the wheel by pulling, clean the dirt off it. 2. Re-install the omni-directional wheel and press it tight. Note: 1. The omni-directional wheel can be washed. Please install it after air-drying. 2. You will find a piece of metal slice when removing, keep it and put it back with the wheel.
If you need to disassemble the battery yourself, please follow the steps below. B 1. Unscrew the battery cover at the button of robot. 2. Open and take out the battery cover. 3. Remove the battery.
Maintenance-base station It is recommended to clean the sewage tank after every time cleaning. 1. Take out the sewage tank. 2. Wash the sewage tank and use the matching brush to clean the inside. Note: the floating ball in the sewage tank is a movable part. Do not wash it with excessive force to avoid damage. 26 3. Put it back to the base station.
It is recommended to clean the clean water tank once every three months. 1. Open the clean water tank. 2. Open the buckle of water pipe and take out the filter sponge. 3. Wash the filter sponge with clean water. 4. Put the sponge back and buckle the water pipe.
Maintenance-base station It is recommended to clean the washboard and the base station’s bottom slot once every two weeks. 1. Lift the handle of the washboard and remove it. 28 2. Remove the washboard and rinse them in water. Use a matching brush to clean the adhering dirt on it.
3. Wipe off the stains in the bottom slot of the base station with a paper towel or a rag. 4. Put the washboard back to the base station.
Maintenance-accessories To ensure cleaning effect, it is recommended to clean the sweeping module once every two weeks, replace the side brush every three to six months. 1. Use the bird knife to cut the hair wrapped around the side brush.
2. Clean the dirt on the sweeping module. 3. Replace with the new side brush when it is broken. Note：1. To replace the new side brush, remove the side brush fixing screw; attach the new side brush and tighten the screw. 2. The sweeping module can be rinsed with water and should be dried before use.
Maintenance-accessories To ensure the cleaning effect, it is recommended to replace the mop once every three months. 1. Tear down the old mop. 32 2. Attach a new pad along the shape of the mopping module. 3. After installation, press the mop firmly.
Troubleshooting Error # Voice guide Info on the base station How to solve the problem 1001 Network connection failed, please check and try again. / Please put the robot to a place with better Wi-Fi signal. 1002 Network connection failed, WiFi password is incorrect. / Please input the correct Wi-Fi password and try again. 1003 Network connection failed, please try again. / Please follow the guidance on APP to connect to network.
Troubleshooting Error # 2006 2007 The robot cannot find the base station, please put it back. If the base station has been moved, please re-map. Info on the base station No map How to solve the problem Map has not been created, please build the map and start cleaning. Cannot find the base station 1. The robot can not find the location of the base station. Please put it back to the base station. 2. The robot is getting stuck when returning to the base station.
Troubleshooting Error # Voice guide Info on the base station How to solve the problem 2015 Room sectioning, please wait Please do not operate the robot during room sectioning It takes 1-3 mins for room sectioning after mapping, please wait. 3001 Side brush malfunction, please clean or replace the brush module. Side brush malfunction 1. Please clean the hair and dirt on side brush by bird knife. 2. Replace the side brush if it is broken.
Troubleshooting Error # Info on the base station How to solve the problem Please check the collision bumper. Please check the collision bumper. Please tap the bumper to remove trash stuck in it. 3011 Cliff sensor error, please wipe the stains on the sensor. Cliff sensor error, please wipe the stains on the sensor. Please wipe the stains on the sensor and start it at an open position. 3012 The robot is in strong magnetic field environment, please check the surrounding.
Troubleshooting Error # Voice guide Info on the base station How to solve the problem Please check the clean-water tank. Please check the clean-water tank 1. Please check if the clean water tank is installed correctly. 2. Please add water to clean water tank if it is empty. 3. Please wash the sponge inside clean water tank. Please check the sewage tank. Please check the sewage tank. 1. Please check if the sewage tank is installed correctly. 2. Please empty the sewage tank if it is full. 3.
Toxic substance Toxic substance Items Pb Hg Cd Cr(VI) PBB PCB board Metal piece Shell Battery Other parts This form is settled in accordance with the stipulations of SJ/T11364. Indicates that the content of this hazardous substance in all homogeneous materials of this part is below the limit requirement specified in GB/T 26572. Indicates that the hazardous substance is at least in a homogeneous material of the part exceeding the limit specified in GB/T 26572.
Specifications Robot Base station Size：31.4*34.5*10.7cm Size：40.1*35.8*43.7cm Color：White Color：White Weight：3.6kg Weight：7.8kg Battery：≥ 5000mAh Rated input：100-240V~50/60Hz , 85W Rated voltage：14.4V Rated output ：20V Rated power：45W Rated frequency：50/60Hz 2.
Warranty policy Item Robot Performance failure ① Functional failure； ② Start-up failure； ③ . sweeping module, mopping module, vacuuming motor, main wheel does not work Base station ① Start-up failure； ② Power supply failure； ③ Water pump, air pump, vacuuming motor does not work； ④ OLED screen display malfunction Power cord Unable to supply power to the base station.
Warranty information Warranty card User name Address Phone No. Product name and nodel number Serial numbe Purchase date Maintenance record Date Error description or accessories replacement After-sales center After-sales engineer 1 2 3 Yunjing Intelligence Technology (Dongguan) Co., Ltd. Room 508, Unit 1, Building 17, No. 4, Xinzhu Rd.
