Users Manual Part 2

Troubleshooting
Please wipe the stains on the sensor and start it at an
open position.
1. The robot is in strong magnetic field environment,
please put it away and start working again.
2. The robot is outside the base station and next to the
magnetic strip, please move the robot away from the
magnetic strip and start working again.
The temperature of battery is too high / low, please wait
and restart after the battery is in normal temperature.
Wall sensor error, please clean the surface of the sensor.
1. Please clean the washboard if it is too dirty.
2. Please check whether the sewage tank is sealed.
3. Please check the seal of the base station's air-inlet,
sewage inlet, clean water inlet.
4. Please clean the bottom of the base station and
overow sensor if they are dirty.
The tires are stuck, please clean the trash inside the
wheel.
Vacuuming motor malfunction, please open the top cover
of the robot, press the power button to restart the robot.
The base station overows,
please check it according to
user manual
Tire malfunction, please
check the wheel.
Wall sensor error, please
clean the surface of the
sensor.
The robot is in strong
magnetic eld environment,
please check the surrounding.
Cli sensor error, please wipe
the stains on the sensor.
Cli sensor error, please
wipe the stains on the
sensor.
Strong magnetic field
environment.
Battery malfunction, please
check.
Please check the battery
Vacuuming motor
malfunction, please open the
top cover of the robot, press
the power button to restart.
Vacuuming motor
malfunction.
Please check the wheel.
Please check the wall
sensor.
The base station
overows, please check
3011
3012
3013
3014
3015
3016
3017
Please tap the bumper to remove trash stuck in it.
Please check the collision
bumper.
Please check the collision
bumper.
3010
36
Error # Voice guide
Info on the base
station
How to solve the problem