Users Manual Part 2

Vacuuming Mopping

1. Install the sweeping module.

2. Short press the start button on the base station or on

the robot to start vacuuming.

3. After vacuuming, the robot will automatically return to the

base station for charging.

1. Install the mopping module.

2. Short press the start button on base station or

robot to start mopping.

3. During mopping, the robot will automatically return to

the base station to wash the mop to keep it clean.

4. After mopping, the robot will automatically return to

the base station for charging.

Note:

1. Please put a proper amount of water in the water tank

before mopping the oor.

2. Empty the sewage tank after mopping.

3. Do not move the water tank while the robot is cleaning

the mop.

4. If you need to use detergent to enhance the mopping

eect during the mopping process, please use the

special detergent for this product. Do not use any other

detergent.