User's Manual

ManualsBrandsNASACO Electronics ManualsAudio EquipmentWireless Headphone USB Dongle

Table Of Contents

Hauppauge Xfones Virtual Surround Headphone

QI-XFones-V1.0-ENG

June 06 2007

Hauppauge Xfones Virtual Surround Headphone

Quick Installation Guide for Windows XP, Windows Vista

And Mac Operating Systems

Hauppauge Computer Works. Inc. Telephone: 631-434-1600

91 Cabot Court Tech Support: 631-434-3197

Hauppauge, NY 11788 techsupport@hauppauge.com

Hauppauge Computer Works, GmbH Telephone: 02161-694880

Krefelder Straße 669 Tech Support: 02161-6948840

41061 Mönchengladbach, Germany

info@Hauppauge.de

Hauppauge Computer Works, Ltd Telephone: 0207-378-1997

6-10 Bank Chambers Fax: 0207-357-9171

Borough High Street Tech Support 0207-378-0202

London, U.K. SE19QQ support@hauppauge.co.uk

Hauppauge Digital Asia Pte Ltd

Support@Hauppauge.com.sg

BLK 1093, Lower Delta Road, #04-05, Website: www.hauppauge.com.sg

Tiong Bahru Industrial Estate,

Singapore 169204

www.hauppauge.com

Contents:

• Head Phone set 1 pc

• USB dongle 1 pc

• AAA Batteries 3 pc’s

• Quick Installation Guide (This guide)

USB Features:

• Plug and play

• No software driver required

• Support multiple headphones (broadcast mode)

• Supported operating systems

o Windows XP, Windows Vista

o MAC OS9.1, MAC OS10.4.3

view Bottom view

Headphone Features:

• Auto power off when there is no music transmission

Summary of content (22 pages)

PAGE 1
Hauppauge Xfones Virtual Surround Headphone Quick Installation Guide for Windows XP, Windows Vista And Mac Operating Systems © Hauppauge Computer Works, Inc. 2005-2007 Hauppauge Computer Works. Inc. 91 Cabot Court Hauppauge, NY 11788 Telephone: 631-434-1600 Tech Support: 631-434-3197 techsupport@hauppauge.com Hauppauge Computer Works, GmbH Krefelder Straße 669 41061 Mönchengladbach, Germany Telephone: 02161-694880 Tech Support: 02161-6948840 info@Hauppauge.
PAGE 2
• • Digital volume control Bass boost control Power Bass/Pairing Link LED Vol up Vol down Left Right Link LED Indication: Stationary GREEN: Stationary RED: Flashing RED: GREEN blink twice: GREEN blink once: Headphone is linked with USB Headphone is not linked with USB Headphone enters pairing mode Bass boost is activated Bass boost is deactivated Installing the Hauppauge Xfones under Windows XP: 1. 2.
PAGE 3
. 4. Select Button “Volume” to make sure “Mute All” is not activated. Next, select the button “Advanced” to go to Advanced Audio Properties Windows and then select Tab page “Effect”. Select Button “Play Default Sound” and user should be able to hear the Windows Default Sound transmitted to the Headphone. 5. Start any Media Player applications such Window Media Player, iTune, Real Play and play a music file. The LED Indicator on the USB Dongle will blink as long as there is an audio transmission.
PAGE 4
3. Next, select “Properties” button, then tab page “Advanced” and then “Test” to test the Headphone. User should hear Window default sound transmitted on both Left and Right channel. 4. Start any Media Player applications such as Window Media Player, iTune, Real Play and play a music file. The LED Indicator on the USB Dongle will blink as long as there is an audio transmission. Installing the Hauppauge Xfones under MAC OS 9.1 and 10.4.3: 1.
PAGE 5
3. Under the properties of Sound >> Output tab, depending on the PC/laptop, all various audio devices available in the system will be displayed. Make sure that “USB Audio Device” is selected as shown in the figure below. Bass Boost This headphone comes with bass boost control. By default, there is no bass boost. To turn on bass boost: • Toggle “BASS/PAIRING” switch from non-bass boost condition. Headphone is in non-bass boost condition upon power up.
PAGE 6
When experiencing interference on the wireless headphone, users should follow the following procedure to hop to the next RF channel. There are 8 RF channels available in this system. 1. 2. Toggle the “CHANNEL” switch to change to next RF Channel. Repeat step 1 until clear music is heard on the wireless headphone Install Additional Wireless Headphone Procedures 1. 2. 3. 4. 5. 6. 7. Follow “Operating Procedures” to activate wireless audio transmission on USB Dongle.
PAGE 7
3. Select configuration (as shown in the diagram below) 4. Select Audio tab 5. Select “Headphone” from Speaker Environment. Select “Dolby Headphone” from Output Mode. Configuration QI-XFones-V1.
PAGE 8
6. Select Advance to configure Dolby Headphone. User can choose one of the 3 prefix options. QI-XFones-V1.
PAGE 9
FAQ Problem Possible cause Solution USB does not turn on (no light) USB is spoilt Contact an authorized service centre USB light does not blink after playing music Windows does not switch to USB device Follow installation guide describe above Headphone does not turn on Power switch is not toggled Toggle power switch Batteries are weak Change batteries Headphone is spoilt Contact an authorized service centre Source not playing Plug USB dongle onto PC No sound from Headphone Run music softw
PAGE 10
reconnect to wifi automatically, users should perform manual repair. XP: Choose Control Panel Æ Network connections Æ Wireless LAN devices Æ Right click Æ repair Vista: Choose Control Panel Æ Network and Internet Æ Network and Sharing Center Æ Connect to a Network Æ choose the desired network to connect. Helpful Hints: In case of music distortion, select another frequency channel for the USB transmission.
PAGE 11
FCC Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Change or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
PAGE 12
Revision History Revision 0.1 0.2 0.3 0.4 0.5 Change Reason Draft LED behavior and optional software Putting top and bottom layout Add in EEPROM and BOM tags Update Document Revision Date 2 Mar 07 12 Mar 07 14 Mar 07 18 June 07 11 July 07 By Who Erwin Erwin Erwin Ken Lim Ken Lim ECN No. Remarks st 1 proposal nd 2 proposal rd 3 proposal th 4 proposal Update spec Date By Specifications For Jupiter USB Dongle Transmitter TITLE Document No.
PAGE 13
Specification for Jupiter USB Dongle Transmitter 1. FEATURES • • • • • • • • • • • USB 1.1 full-speed compliant stereo audio transmitter. Uncompressed audio transmission. Plug-and-play USB Audio transmitter. Support 8 KHz, 11.025 KHz, 44.1 KHz and 48 KHz sampling rates for 2 channels playback. Compatible with Win98 SE/ WinME/ Win2000/ WinXP and MacOS 9.2.1/MacOS10.2 without additional driver. 2.4GHz GFSK Transmitter with 8 selectable channels. There are buttons for channel select and ID Training.
PAGE 14
4. BLOCK DIAGRAMS EEPROM 93LC46 ANT Power Down GND D+ USB Type A Interface D5V_BUS Serial Control USB Audio Controller SN11122 ARF 2 IS 48 kHz SRC Baseband Processor FS2207 2 IS RFIC FS2251-T RF Out AK4121 AVF 1.8V LDO Channel Select ID Training 3.3V LDO Figure (1) : Wireless USB Audio Transmitter Block Diagram Specifications For Jupiter USB Dongle Transmitter TITLE Document No.
PAGE 15
5. ELECTRICAL SPECIFICATIONS Specifications are guaranteed by design and characterization. PCB material used is FR4 4 layers of 1.0mm thickness or equivalent Absolute Maximum Rating Symbol Parameter Min. VCC Supply Voltage (USB) Tstorage Storage Temperature Max -20 Units 6.
PAGE 16
Digital Characteristic (VCC=3.3V, 25°C) Symbol Parameter IiL Low Level Input Current IiH (input buffer) High Level Input Current Condition Min. Vin=0V -5 -5 (input buffer) Vin=3.
PAGE 17
6. Document Review EEPROM rev Jupiter rev 2 MSW062004_TX_rev3.dat EEPROM doc MSW062004_TX_rev3.doc BOM rev Gerber rev Jupiter2_BOM_rev6.xle EE062001_GB_rev3.zip 7. Reliability Measurement Result 1 Test Items Temperature & Humidity Operation Test Test Conditions Test Method 1. Check System performance with blocking Test 2.
PAGE 18
9. MECHANICAL DIMENSION • Top side’s Mechanical Parts & Dimension Specifications For Jupiter USB Dongle Transmitter TITLE Document No. Draft Document Company Confidential PRD062002 Created By Ken Lim Approved By SiewCK Date 11 July 07 Page 7 of 11 Revision 0.
PAGE 19
• Top and Bottom side’s Component Placement Bottom Side Top Side . Specifications For Jupiter USB Dongle Transmitter TITLE Document No. Draft Document Company Confidential PRD062002 Created By Ken Lim Approved By SiewCK Date 11 July 07 Page 8 of 11 Revision 0.
PAGE 20
• Important Mechanical Parts’ Dimensions USB Connector - USB4P-AMHF-N9-W-G (Townes) Specifications For Jupiter USB Dongle Transmitter TITLE Document No. Draft Document Company Confidential PRD062002 Created By Ken Lim Approved By SiewCK Date 11 July 07 Page 9 of 11 Revision 0.
PAGE 21
LED - HSMH-C170 (Avago) Specifications For Jupiter USB Dongle Transmitter TITLE Document No. Draft Document Company Confidential PRD062002 Created By Ken Lim Approved By SiewCK Date 11 July 07 Page 10 of 11 Revision 0.
PAGE 22
Tact Switch - SKQYACE010 (Alps) Specifications For Jupiter USB Dongle Transmitter TITLE Document No. Draft Document Company Confidential PRD062002 Created By Ken Lim Approved By SiewCK Date 11 July 07 Page 11 of 11 Revision 0.