SDS

5
8. Exposure Controls/Personal Protection
8.1 Exposure Limits
Sanofi-aventis occupational exposure limit, triamcinolone acetonide: 0.001 mg/m
3
, 8-hour TWA.
8.2 Appropriate Engineering Controls
Provide adequate ventilation. No other specific controls are needed under normal handling
conditions.
8.3 Individual Protection Measures
Eye/face protection: Safety glasses or safety goggles should be worn if there is a potential for eye
contact with the product.
Skin protection: Suitable protective gloves should be worn. Use of a protective or disposable
gown or laboratory coat is recommended if there exists a potential for contact with the product.
Respiratory protection: None normally required for routine handling of the product. However,
approved respiratory protection should be worn if there is a potential for exposure to the product.
A respiratory protection program that meets OSHA 29 CFR 1910.134 and ANSI Z88.2 must be
followed whenever workplace conditions warrant respirator usage.
General hygiene considerations: Wash hands before breaks and at the end of the work shift.
9. Physical and Chemical Properties
Appearance: liquid.
Odor: none known.
Odor threshold: none known.
pH: 5.0 (target pH); range 4.5 – 6.0.
Melting point/
Freezing point: no data available.
Initial boiling point/boiling point range: no data available.
Flash point: no data available.
Evaporation rate: no data available.
Flammability: no data available.
Upper/lower flammability or explosive limits: no data available.
Vapor pressure: no data available.
Vapor density: no data available.
Relative density: no data available.
Solubility: no data available.