Instructions / Assembly

25 Forge Pkwy Franklin, MA 02038
1-800-343-7875 Fax [phone]
www.berryplastics.com
9/30/15
PE Coated Cloth
Rubber
N/A
● ●
● ●
● ●
●
● ●
●
●
●
● ●
extremely rough materials
● ●
Recommended Storage Conditions: 32-90 °F at 50% RH ± 2%
Standard Shelf Life (at 25C): 36 months from date of manufacture.
The information presented herein was prepared at BERRY PLASTICS CORPORATION (25 Forge Parkway Franklin, MA 02038) by qualified technical personnel. To Berry Plastics knowledge it is true
and accurate. However, the information and recommendations are furnished for these products with the understanding that the purchaser or user, as the case may be, will independently determine that
the product is suitable for the intended use, and that such use complies with all applicable federal, state and local laws and regulations. The data are typical values submitted only for the user's
information and consideration, and do not constitute a warranty of any kind (including but not limited to a warranty of merchantability or of fitness for a particular purpose), or a representation for which
BERRY PLASTICS assumes any legal responsibility.
Tensile Strength
ASTM D-1000
20
In accordance with UL723
Flame Spread
15
In accordance with UL723
Operating Temperature
VOC Content
Smoke Developed
40 to 200 °F
357
Premium Grade Duct Tape
Silver, Black, Red, White, OD, Dark Blue
Backing:
Liner:
Adhesive:
Colors:
Standard Sizes:
48mm x 55m, 72mm x 55m
4 to 93 °C
Total Thickness
Adhesion to Steel
13.0
mils
0.330
mm
95
oz/in
10.39
N/cm
50
lb/in
87.56
N/cm
Metric UOM
<1 g/L
Test Method
ASTM D-1000
PSTC-101
Low VOC Content
Can contribute toward satisfying EQ Credit 4.1
(Low Emitting Materials) under LEED®
Typical Test Values
Plastering applications
Benefits
Features
Natural rubber based adhesive
Aggressive adhesion to all surfaces - including
High tensile strength for difficult applications
Heavy-duty contractor and manufacturing uses
Moisture, solvent, and chemical resistant
Abrasion and puncture resistant
Crisp, straight tear
Elongation
13%
ASTM D-1000
Specifications:
Tested in accordance with UL 723
Seaming & sealing for heavy PE sheeting and tarps
PE-Coated Cloth Backing
Heavy-duty packaging and bundling
Applications
Media-blast protection
Standard UOM
Seaming & securing underlayment materials
Waterproof repairs
Backing
Adhesive