Instructions / Assembly

25 Forge Pkwy Franklin, MA 02038
1-800-343-7875 Fax [phone]
www.nashuatape.com
12/17/15
Polyethylene Film
Rubber
N/A
Standard Sizes: 48mm x 55m
● ●
●
● ●
●
●
● ●
● Repositionable & clean removal - no residue
Recommended Storage Conditions: 40-60% Humidity, 60ºF-80ºF
Standard Shelf Life (at 25C): 24 months from date of manufacture.
The information presented herein was prepared at BERRY PLASTICS CORPORATION (25 Forge Parkway Franklin, MA 02038) by qualified technical personnel. To Berry Plastics' knowledge it is true and
accurate. However, the information and recommendations are furnished for these products with the understanding that the purchaser or user, as the case may be, will independently determine that the product
is suitable for the intended use, and that such use complies with all applicable federal, state and local laws and regulations. The data are typical values submitted only for the user's information and
consideration, and do not constitute a warranty of any kind (including but not limited to a warranty of merchantability or of fitness for a particular purpose), or a representation for which BERRY PLASTICS
assumes any legal responsibility.
Operating Temperature
40 to 200 °F
4 to 93 °C
Elongation
75%
35.03
N/cm
Adhesion to Steel
PSTC-101
Tensile Strength
ASTM D-1000
45
oz/in
20
lb/in
4.92
N/cm
Test Method
Total Thickness
ASTM D-1000
7.0
mils
0.178
mm
Standard UOM Metric UOM
Typical Test Values
Polyethylene Film Backing
Conformable and flexible
Excellent durability and solvent resistance
Withstands outdoor exposure and moisture
Features
Benefits
Natural Rubber based adhesive
High tack for a secure bond
677
Stucco Pro Masking Tape
Backing:
Adhesive:
Liner:
Colors:
Red
Applications
Stucco and plaster masking
Bunding, wrapping, and repairs
General purpose outdoor masking
Specifications:
N/A