Specification

8/5/16
Printed Aluminum Foil
Acrylic
Unbleached Natural Kraft Paper
UL 181B-FX Listed
2.5 in x 60 yd (63.5 mm x 54.9 m)
! ! Suitable for use on rigid sheet metal ducts
! Durable seal for dryer ventilation
!
!
Can contribute toward satisfying EA Credit 1
(Optimize Energy Performance) under LEED®
! Superior bond in cold (down to -25 ºF) or hot
!
!
Resistant to moisture and mold
!
!
!
181A/B printed for easy inspector identification
!
25 Forge Parkway Franklin, MA 02038
1-800-343-7875 Fax [phone]
www.nashuatape.com
The information presented herein was prepared at BERRY PLASTICS CORPORATION (25 Forge Parkway Franklin, MA 02038) by qualified technical personnel. To Berry Plastics' knowledge it is true
and accurate. However, the information and recommendations are furnished for these products with the understanding that the purchaser or user, as the case may be, will independently determine that
the product is suitable for the intended use, and that such use complies with all applicable federal, state and local laws and regulations. The data are typical values submitted only for the user's
information and consideration, and do not constitute a warranty of any kind (including but not limited to a warranty of merchantability or of fitness for a particular purpose), or a representation for which
BERRY PLASTICS assumes any legal responsibility.
Installation Temperature
-10 to 200 °F
4 to 93 °C
Operating Temperature
-25 to 325 °F
-32 to 163 °C
VOC Content
< 1 g/L
Recommended Storage Conditions: 32 - 90 °F at 50% RH ± 2%
Standard Shelf Life (at 25 °C): 36 months from date of manufacture
Tensile Strength
23 lb/in
40.28 N/cm
ASTM D-1000
Total Thickness
4.8 mils
122 μm
ASTM D-1000
Adhesion to Steel
68 oz/in
7.44 N/cm
PSTC-101
Low VOC Content
Can contribute toward satisfying EQ Credit 4.1
(Low Emitting Materials) under LEED®
Typical Test Values
Standard UOM
Metric UOM
Test Method
Acrylic Adhesive
humid conditions (up to 325 ºF)
High tack and adhesion
Aluminum Foil Backing
Thick and durable
Conforms securely around duct and corners
UL 181B-FX & 181A-P Listed
Meets code requirements in sealing rigid and
flexible air ducts and connections
Colors:
Aluminum
Available Size:
Applications
Premium closure system for permanently sealing
fiberglass duct board and flexible duct systems
Features
Benefits
324A PREMIUM FOIL
Backing:
Adhesive:
Liner:
Specifications:
UL 181A-P Listed