Specification

8/5/16
Printed Polyethylene Coated Cloth
Natural Rubber
N/A
1.89 in x 60.1 yd x 14 mil
(48 mm x 50 m x 355 μm)
! ! Sheet metal and duct repair
! Challenging bonding, protecting, bundling, and
!
!
!
Can contribute toward satisfying EA Credit 1
(Optimize Energy Performance) under LEED®
!
!
!
Resistant to moisture and mold
!
!
!
181B-FX printed for easy inspector identification
!
25 Forge Parkway Franklin, MA 02038
1-800-343-7875 Fax [phone]
www.nashuatape.com
The information presented herein was prepared at BERRY PLASTICS CORPORATION (25 Forge Parkway Franklin, MA 02038) by qualified technical personnel. To Berry Plastics' knowledge it is true
and accurate. However, the information and recommendations are furnished for these products with the understanding that the purchaser or user, as the case may be, will independently determine that
the product is suitable for the intended use, and that such use complies with all applicable federal, state and local laws and regulations. The data are typical values submitted only for the user's
information and consideration, and do not constitute a warranty of any kind (including but not limited to a warranty of merchantability or of fitness for a particular purpose), or a representation for which
BERRY PLASTICS assumes any legal responsibility.
Polyethylene Coated Cloth Backing
VOC Content
< 1 g/L
Recommended Storage Conditions: 32 - 90 °F at 50% RH ± 2%
Standard Shelf Life (at 25 °C): 36 months from date of manufacture
Tensile Strength
29 lb/in
50.79 N/cm
ASTM D-1000
Operating Temperature
40 to 200 °F
4 to 93 °C
Total Thickness
14 mils
355 μm
ASTM D-1000
Adhesion to Steel
45 oz/in
4.92 N/cm
PSTC-101
Low VOC Content
Can contribute toward satisfying EQ Credit 4.1
(Low Emitting Materials) under LEED®
Typical Test Values
Standard UOM
Metric UOM
Test Method
Natural Rubber Adhesive
Excellent bond to sheet metal and other surfaces
High strength to withstand duct system pressure
High strength and durable
Conformable to wrap ducts for an effective seal
UL 181B-FX Listed
Meets code requirements for sealing flexible air
ducts and connections
Colors:
Silver
Available Size:
Applications
Tough, heavy-duty closure system for sealing
Class 1 flexible air ducts and connectors
Heavy-duty HVAC sealing and repairs
patching
Features
Benefits
Backing:
Adhesive:
Liner:
Specifications:
UL 181B-FX Listed
PRO-GRADE
DUCT
557
HVAC