Installation Guide

ManualsBrandsNashua Tape ManualsHeating, Ventilation, and Air Conditioning1 in. x 3.33 yd. Stretch & Seal Self-Fusing Silicone Tape - Black

Feb. 2009

The information presented herein was prepared at BERRY PLASTICS CORPORATION (25 Forge Parkway Franklin, MA 02038) by qualied technical personnel. To Berry Plastics’ knowledge it is true and accurate.

However, the information and recommendations are furnished for these products with the understanding that the purchaser or user, as the case may be, will independently determine that the product is suitable for the

intended use, and that such use complies with all applicable federal, state and local laws and regulations. The data are submitted only for the user’s information and consideration, and do not constitute a warranty of

any kind (including but not limited to a warranty of merchantability or of tness for a particular purpose), or a representation for which BERRY PLASTICS assumes any legal responsibility.

Instructions for Use

Step 1:

Peel away clear cellophane

release liner.

Step 2:

Press tape rmly on object to be wrapped,

hold in place and begin rst by wrapping

the tape once completely over itself.

Step 3:

While holding the tape in place, stretch to 2

to 3 times its length and wrap object with a

2/3 overlap. This will ensure a tight seal.

Step 4:

To complete the repair, wrap tape completely

over the previous layer and press rmly.

Dependable. Reliable. Professional.

STRETCH & SEAL