Instructions / Assembly

Feb. 2009
For more information:
25 Forge Parkway
Franklin, MA 02038
Phone 508.918.1600
Toll Free 1.800.343.7875
Fax 508.918.1901
The information presented herein was prepared at BERRY PLASTICS CORPORATION (25 Forge Parkway Franklin, MA 02038) by quali ed technical personnel. To Berry
Plastics’ knowledge it is true and accurate. However, the information and recommendations are furnished for these products with the understanding that the purchaser
or user, as the case may be, will independently determine that the product is suitable for the intended use, and that such use complies with all applicable federal, state
and local laws and regulations. The data are submitted only for the user’s information and consideration, and do not constitute a warranty of any kind (including but not
limited to a warranty of merchantability or of  tness for a particular purpose), or a representation for which BERRY PLASTICS assumes any legal responsibility.
Instructions for Use
Step 1:
Peel away clear cellophane
release liner.
Step 2:
Press tape rmly on object to be wrapped,
hold in place and begin rst by wrapping the
tape once completely over itself.
Step 3:
While holding the tape in place, stretch to 2
to 3 times its length and wrap object with a
2/3 overlap. This will ensure a tight seal.
Step 4:
To complete the repair, wrap tape completely
over the previous layer and press rmly.
TM
tapes.berryplastics.com
For more information:
25 Forge Parkway
Franklin, MA 02038
Phone 508.918.1600
Toll Free 1.800.343.7875
Fax 508.918.1901
© Berry Plastics Corporation
016HJ_05-12

Summary of content (1 pages)