Specification

4/25/17
Polyethylene
Butyl Rubber
White Polyethylene Film
6 in x 50 ft x 20 mil
(152 mm x 15.2 m x 508 μm)
" "
" "
against air and moisture infiltration
"
"
blended sealants or caulking materials
" Excellent all-weather performance
"
"
"
25 Forge Parkway Franklin, MA 02038
1-800-343-7875 Fax [phone]
www.nashuatape.com
SELECT WINDOW &
DOOR FLASHING TAPE
Backing:
Adhesive:
Liner:
Specifications:
N/A
Colors:
Black
Available Size:
Applications
installations
wall joints
Sealing building envelope penetration areas
Sealing corner board abutments
Flashing and sealing around window and door
Sealing sidewall sheathing seams and deck-to-
Features
Benefits
Low VOC Content
Can contribute toward satisfying EQ Credit 4.1
(Low Emitting Materials) under LEED®
Resists direct UV exposure for up to 1 year
Provides a strong and immediate bond to most
building surfaces
Compatible with silicone, butyl, polyurethane, and
Tough and durable
Typical Test Values
Standard UOM
Metric UOM
Test Method
Adhesion to Steel
125 oz/in
13.68 N/cm
PSTC-101
Tensile Strength
28 lb/in
49.04 N/cm
ASTM D-1000
Recommended Storage Conditions: 60 - 80 °F at 40-60% RH
Standard Shelf Life (at 25 °C): 36 months from date of manufacture
The information presented herein was prepared at BERRY GLOBAL, INC. (25 Forge Parkway Franklin, MA 02038) by qualified technical personnel. To BERRY's knowledge it is true and accurate.
However, the information and recommendations are furnished for these products with the understanding that the purchaser or user, as the case may be, will independently determine that the product is
suitable for the intended use, and that such use complies with all applicable federal, state and local laws and regulations. The data are typical values submitted only for the user's information and
consideration, and do not constitute a warranty of any kind (including but not limited to a warranty of merchantability or of fitness for a particular purpose), or a representation for which BERRY assumes
any legal responsibility.
Butyl Rubber Adhesive
Polyethylene Backing
Total Thickness
20 mils
508 μm
ASTM D-1000
Installation Temperature
20 to 160 °F
-7 to 71 °C
Operating Temperature
-20 to 180 °F
-29 to 82 °C
527-20