TDS

5/4/17
Polyethylene Film
Rubber
N/A
1.89 in x 54.7 yd (48 mm x 50 m)
! !
! !
!
!
!
!
!
!
!
25 Forge Parkway Franklin, MA 02038
1-800-343-7875 Fax [phone]
www.nashuatape.com
sheeting
many surfaces
RESIDUE FREE POLY HANGING
Backing:
Adhesive:
Liner:
Specifications:
N/A
Colors:
Red, Teal
Available Size:
Applications
Ideal for hanging, patching, and seaming poly
Non-residue adhesive is also repositionable on
Masking windows and doors for paint projects
Removes cleanly for up to 7 days
Features
Benefits
Rubber Adhesive
Clean release, no residue
High tack for a secure bond
Repositionable
Solvent and moisture resistant
Conformable to bond to curves and around corners
Hand-tearable for ease of use
Typical Test Values
Low VOC Content
Can contribute toward satisfying EQ Credit 4.1
(Low Emitting Materials) under LEED®
Standard UOM
Metric UOM
Test Method
Total Thickness
7.0 mils
178 μm
ASTM D-1000
PSTC-101
Tensile Strength
25 lb/in
43.78 N/cm
ASTM D-1000
Recommended Storage Conditions: 60 - 80 °F at 40-60% RH
Standard Shelf Life (at 25 °C): 36 months from date of manufacture
The information presented herein was prepared at BERRY GLOBAL, INC. (25 Forge Parkway Franklin, MA 02038) by qualified technical personnel. To BERRY's knowledge it is true and accurate.
However, the information and recommendations are furnished for these products with the understanding that the purchaser or user, as the case may be, will independently determine that the product is
suitable for the intended use, and that such use complies with all applicable federal, state and local laws and regulations. The data are typical values submitted only for the user's information and
consideration, and do not constitute a warranty of any kind (including but not limited to a warranty of merchantability or of fitness for a particular purpose), or a representation for which BERRY assumes
any legal responsibility.
Polyethylene Film Backing
Serrated Edge
Operating Temperature
20 to 200 °F
-7 to 93 °C
VOC Content
< 1 g/L
Adhesion to Steel
75 oz/in
8.21 N/cm