Instructions / Assembly

11/1/17
Acrylic
N/A
1.89 in x 30 yd (48 mm x 27.4 m)
! !
!
!
!
!
!
! Conformable for hard-to-seal areas
!
181B-FX printed for easy inspector identification
!
25 Forge Parkway Franklin, MA 02038
1-800-343-7875 Fax [phone]
www.nashuatape.com
Installation Temperature
-10 to 180 °F
-17 to 82 °C
Operating Temperature
-40 to 212 °F
-40 to 100 °C
Recommended Storage Conditions: 60 - 80 °F at 40-60% RH
Standard Shelf Life (at 25 °C): 24 months from date of manufacture
The information presented herein was prepared at BERRY GLOBAL, INC. (25 Forge Parkway Franklin, MA 02038) by qualified technical personnel. To BERRY's knowledge it is true and accurate.
However, the information and recommendations are furnished for these products with the understanding that the purchaser or user, as the case may be, will independently determine that the product is
suitable for the intended use, and that such use complies with all applicable federal, state and local laws and regulations. The data are typical values submitted only for the user's information and
consideration, and do not constitute a warranty of any kind (including but not limited to a warranty of merchantability or of fitness for a particular purpose), or a representation for which BERRY assumes
any legal responsibility.
VOC Content
< 1 g/L
Adhesion to Steel
45 oz/in
4.92 N/cm
PSTC-101
Tensile Strength
34 lb/in
59.54 N/cm
ASTM D-1000
Total Thickness
3.1 mils
79 μm
ASTM D-1000
Biaxially-Oriented Polypropylene Film
Tough and durable
Hand tearable for simple, quick installation
Low VOC Content
Can contribute toward satisfying EQ Credit 4.1
(Low Emitting Materials) under LEED®
Typical Test Values
Standard UOM
Metric UOM
Test Method
Acrylic Adhesive
Aggressive, high tack bond to insulation jacket
Low-odor adhesive
Mold and moisture-resistant
Conforms and bonds securely to water heater
Tough, contractor-grade closure system intended
insulation jacketing to seal seams and repair rips
and tears
Features
Benefits
for use on UL Listed flexible, non-metallic ducts
Applications
WATER HEATER INSTALLATION
Backing:
Printed Biaxially-Oriented Polypropylene Film
Adhesive:
Liner:
Specifications:
UL 181B-FX Listed
Colors:
Metallic
Available Size: