Specification

2/21/17
Polyethylene Coated Cloth
Natural Rubber
N/A
1.89 in x 30 yd x 8.5 mil
(48 mm x 27.4 m x 215 μm)
" "
Protective masking of unpainted construction
"
"
and smooth surfaces
"
"
"
"
25 Forge Parkway Franklin, MA 02038
1-800-343-7875 Fax 1-800-328-4822
www.nashuatape.com
Recommended Storage Conditions: 32 - 90 °F at 50% RH ± 2%
Standard Shelf Life (at 25 °C): 36 months from date of manufacture
The information presented herein was prepared at BERRY PLASTICS CORPORATION (25 Forge Parkway Franklin, MA 02038) by qualified technical personnel. To Berry Plastics' knowledge it is true
and accurate. However, the information and recommendations are furnished for these products with the understanding that the purchaser or user, as the case may be, will independently determine that
the product is suitable for the intended use, and that such use complies with all applicable federal, state and local laws and regulations. The data are typical values submitted only for the user's
information and consideration, and do not constitute a warranty of any kind (including but not limited to a warranty of merchantability or of fitness for a particular purpose), or a representation for which
BERRY PLASTICS assumes any legal responsibility.
Operating Temperature
40 to 200 °F
4 to 93 °C
VOC Content
< 1 g/L
Adhesion to Steel
62 oz/in
6.78 N/cm
PSTC-101
Tensile Strength
21 lb/in
36.78 N/cm
ASTM D-1000
Total Thickness
8.5 mils
215 μm
ASTM D-1000
Polyethylene Coated Cloth Backing
Low VOC Content
Typical Test Values
Standard UOM
Metric UOM
Test Method
Features
Natural Rubber Adhesive
EASY ON, EASY OFF
CLEAN RELEASE TAPE
Backing:
Adhesive:
Liner:
Specifications:
N/A
Colors:
Silver
Available Size:
Applications

Summary of content (1 pages)