Instructions / Assembly

8/31/20
Polyethylene Film
Rubber
N/A
1.89 in x 54.7 yd (48 mm x 50 m)
! !
!
!
!
!
!
!
!
!
!
!
*From Most Surfaces. Recommended for unpainted surfaces only.
25 Forge Parkway Franklin, MA 02038
1-800-343-7875 Fax 1-800-328-4822
www.nashuatape.com
Recommended Storage Conditions: 60 - 80 °F at 40-60% RH
Standard Shelf Life (at 25 °C): 36 months from date of manufacture
The information presented herein was prepared at BERRY GLOBAL, INC. (25 Forge Parkway Franklin, MA 02038) by qualified technical personnel. To BERRY's knowledge it is true and accurate. However,
the information and recommendations are furnished for these products with the understanding that the purchaser or user, as the case may be, will independently determine that the product is suitable for the
intended use, and that such use complies with all applicable federal, state and local laws and regulations. The data are typical values submitted only for the user's information and consideration, and do not
constitute a warranty of any kind (including but not limited to a warranty of merchantability or of fitness for a particular purpose), or a representation for which BERRY assumes any legal responsibility.
Serrated Edge
Operating Temperature
20 to 200 °F
-7 to 93 °C
VOC Content
< 1 g/L
Adhesion to Steel
75 oz/in
8.21 N/cm
PSTC-101
Tensile Strength
25 lb/in
43.78 N/cm
ASTM D-1000
Standard UOM
Metric UOM
Test Method
Total Thickness
7.0 mils
178 μm
ASTM D-1000
Typical Test Values
Low VOC Content
Rubber Adhesive
Polyethylene Film Backing
Features
Applications
Backing:
Adhesive:
Liner:
Specifications:
N/A
Colors:
Red, White
Available Size:
EASY ON, EASY OFF CLEAN RELEASE TAPE

Summary of content (1 pages)