Instructions / Assembly

8/31/20
Aluminum Foil
Synthetic Rubber
Unbleached Natural Kraft Paper
2.83 in x 50.3 yd (72 mm x 46 m)
! !
!
!
!
!
!
!
!
!
Mold and mildew resistant
!
!
!
25 Forge Parkway Franklin, MA 02038
1-800-343-7875 Fax [phone]
www.nashuatape.com
heating, and ventilation systems
Sealing and patching insulation materials
Backing:
Adhesive:
Liner:
Specifications:
UL 723 Classified
Colors:
Aluminum
Available Size:
Applications
Sealing joints and seams in duct work for A/C,
General purpose industrial and automotive uses
Sheet metal repair and maintenance applications
Features
Benefits
Synthetic Rubber Adhesive
Extreme high tack, aggressive bond to surfaces
Good all-weather performance
Non-solvent for less odor and low VOC content
Aluminum Foil Backing
Conformable to fit corners and joints
UV and moisture resistant
Greater surface coverage for seals and repairs
Meets flammability requirements for use on
Class 1 duct
Can contribute toward satisfying EQ Credit 4.1
Typical Test Values
Standard UOM
Metric UOM
Test Method
Total Thickness
3.5 mils
89 μm
ASTM D-1000
Adhesion to Steel
90 oz/in
9.85 N/cm
PSTC-101
10
Tensile Strength
11 lb/in
19.26 N/cm
ASTM D-1000
Operating Temperature
40 to 200 °F
4 to 93 °C
The information presented herein was prepared at BERRY GLOBAL, INC. (25 Forge Parkway Franklin, MA 02038) by qualified technical personnel. To BERRY's knowledge it is true and accurate. However,
the information and recommendations are furnished for these products with the understanding that the purchaser or user, as the case may be, will independently determine that the product is suitable for the
intended use, and that such use complies with all applicable federal, state and local laws and regulations. The data are typical values submitted only for the user's information and consideration, and do not
constitute a warranty of any kind (including but not limited to a warranty of merchantability or of fitness for a particular purpose), or a representation for which BERRY assumes any legal responsibility.
Wide Width
UL 723 Classified
Low VOC Content
(Low Emitting Materials) under LEED®
VOC Content
< 1 g/L
Recommended Storage Conditions: 60 - 80 °F at 40-60% RH
Standard Shelf Life (at 25 °C): 36 months from date of manufacture
Smoke Developed
25
Flame Spread
EXTRA WIDE MULTI-PURPOSE
322
HVAC