Installation Guide

Seaming Step 3 (Option 1): Secure Seam
Open the two sides of grass, at the seam and fold edges back, about 12 inches, hold edges
down with weight. Lay out your seam fabric - shiny side down. Using a ¼ inch V-Notch
Trowel - apply the glue, to approximately 80% of the width of the seam fabric, generously -
trowel across the glue, to evenly distribute - once you have applied the glue to the whole
length of seam - CAREFULLY flip over one side, then the other. Gently walk off - wait 20-30
minutes before walking on the seam or other areas of the surfaces.
(AVAILABLE ONLINE AT HOMEDEPOT.COM - 1 sided, non-porous - 8 inch seam fabric, shown, below)
Option 1: Using Seam Glue
Page 6\10
ARTIFICIAL GRASS INSTALLATION TIPS