Installation Guide

Seaming: Step 1:
Set the Grain & Position
Setting GRAIN - Make sure to point each section of grass in the same direction,
(our diagram shows the 2 pieces set in the wrong way) Lay each section of grass
down, side by side, in the way in which you want them seamed together.
Make adjustments, now, before you seam! DO NOT CUT ANY OF THE OUTSIDE
EDGES - UNTIL AFTER SEAMING IS COMPLETED!
For Best Results Always
SET the GRAIN of EACH PIECE
in the SAME DIRECTION
Grain Direction
Grain Direction
Page 4\10
ARTIFICIAL GRASS INSTALLATION TIPS