Let’s build the Tamlin Wall Light 5 35 SEMBL Y A S M I N UT E 3 SKU 15001 Scan me! Inspiration Digital Instructions Free Lifetime Warranty 22-0801
Ok, let’s get rolling This should be easy, just follow our instructions and you will be back to Netflix in no time. Estimated time for assembly 35:00 What’s included Description Qty 1 Fixture 1 2 6” Stem 1 3 12” Stem 1 4 12” Stem 1 A M3.
Safety first, fun later Safe use of this product starts with you. Do not modify the structure of this product in any way. Use this light fixture responsibly with the primary concern for your safety. Follow assembly instructions carefully and inspect product upon receipt and each use. Our products have been tested to meet specific safety measures as they were originally intended to be sold.
The goods 2 1 A B C 3 D E 4 F J IMPORTANT 1. Do not tighten bolts / screws completely until all bolts / screws are lined up and inserted into holes. 2. Do not over tighten screws and bolts to avoid stripping. 3. Please use hand tools to assemble this product. Do not use power tools.
Pre-Installation • Read all instructions prior to beginning assembly. • To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard. • Keep the receipt and these instructions for proof of purchase.
Step 2 Remove wires that run to the plug from each wire connector component in order to allow the cord to be released out the bottom of the fixture.
Step 3 Remove the cord out the bottom of the fixture in order to install the decorative cord stem at its desired length.
Step 4 Decide your decorative cord stem desired length. (See possible configurations) Then, pass the cord through each of the selected decorative cord stem components.
Step 5 Thread the cord back into the Fixture (1). 1 Step 6 Using the pre-attached wire connectors in the Fixture (1), insert the White (Neutral) wire into the connector with the White wire. Insert the Black (Hot) wire into the connector with the Black wire. 2 1 White (Neutral) 2 1 Black (Hot) Note: Be sure that you are only making the connections to a 120V 60Hz AC circuit. If you do not have a pre-existing electrical box, we strongly advise using a certified electrician.
Step 7 Thread the choosen decorative cord stem components (from Step 4) together before finally attaching them to the bottom of the Fixture (1).
Step 8 Place Mounting Plate (Wall) (C) in the desired location & height. Use the holes as a guide to mark where you will drill the holes for the wall anchors.
Step 9 Using a 1/4” (or 6mm) Drill Bit, drill your holes for the wall anchors to be placed in. Step 10 Insert the Wall Anchors (B) into the drilled holes. If you encounter some resistance, feel free to use something to slightly tap them into place.
Step 11 Mount the Mounting Plate (Wall) (C) to the wall by screwing the wood screws (A) into the wall anchors. A C Step 12 Secure the Fixture (1) to the Mounting Plate (C).
Step 13 1 Secure one Type G50 bulb (120V 60Hz AC only) into the fixture and hurray! Assembly is complete! Light bulb (not included) 14
Step 14 Plug it in and let there be light! Troubleshooting Problem Possible Causes Solutions The bulb will not light. The bulb is burned out. Replace the light bulb. The power is off. Ensure the power supply is on. The circuit breaker is off. Ensure the circuit breaker is in the ON position. There is an exposed wire. Discontinue use of the light. Contact a qualified electrician or reach out to our Customer Happiness team at help@nathanjames.com or 1-866-619-1004.
Option 2: For Electrical Box Mounting / Hardwire Installation Step 1 Let’s get this thing fired up! Remove the Mounting Plate (C) from the back of the Fixture by unscrewing the Fixture Screws (D).
Step 2 Remove wires that run to the plug from each wire connector component in order to allow the cord to be released out the bottom of the fixture.
Step 3 Remove the cord with the plug from the bottom of the fixture. Step 4 Using the provided wrench, remove the small stem from the bottom of the fixture.
Step 5 Place the plastic plug inside the hole in the bottom of the fixture that the small stem filled originally. 1 F Step 6 Mount the Mounting Plate (Electrical Box) (G) to the electrical box. E Double check that everything is level! G Note: Be sure that you are only making the connections to a 120V 60Hz AC circuit. If you do not have a pre-existing electrical box, we strongly advise using a certified electrician.
Step 7 Wrap the ground wire from the Fixture around the grounding screw on the Mounting Plate (G) & then secured by tightening the screw. You’re doing great! Snack break? We think so.
Step 8 Okay, let’s get back to it! Use wire connectors to connect the matching colored wires (White to White, Black to Black). Use the Wire Nuts (H) to connect the ground wire from the Electrical Box to the Ground wire from the Fixture (1). Once complete, tuck the excess wire into the Electrical Box.
Step 9 Last step! First secure the Fixture (1) to the Mounting Plate (G). Once fully secure, then install a light bulb (not included) and voila! D D Let there be light! 1 Bulb (not included) We recommend using 1 Type G50 light bulb. 120V 60Hz AC only. Troubleshooting Problem Possible Causes Solutions The bulb will not light. The bulb is burned out. Replace the light bulb. The power is off. Ensure the power supply is on. The circuit breaker is off.
Questions? Don’t worry, we’ve got the answers What other light bulbs can fit in this light? Is this light compatible outside North America? The bulb must not be greater than the max wattage for the fixture. It must match the base size, and the diameter of any area of the bulb should be less than diameter of any area of shade, so that it can fit. Our lighting is only warranted in Canada and the United States.
No heartburn, when we handle the return Give us a call 1-866-619-1004 or shoot us a message at help@nathanjames.com we will issue you a free replacement with zero hassle. Our way Their way Give us a call Re-package item Replacement Schedule pick up You Track package Replacement You We really don’t want you to go through the hassle of re-packaging your item and sending it back, because let’s be honest…nobody has time for that.
We are only in business if you’re happy For starters, thanks for being you. Toll-free at 1-866-619-1004 Help@nathanjames.com NathanJames.com/help We do our best to ensure your lighting arrives without any problems, but occasionally mistakes happen—as humans we are imperfect beings. In the event that a part is damaged or missing, we will be more than happy to provide you with replacement part(s) for free. Warranty This product comes with a lifetime warranty from the date of purchase.