Instructions / Assembly

5
Remove Mounting Plate from the
back of the Fixture by unscrewing
Part D & separating the Mounting
Plate from the Fixture.
Friendly tip:
If you don’t need to adjust the
length of the stem, skip to Step 7!
Step 1
Pre-Installation
• Read all instructions prior to beginning assembly.
• To avoid damaging this product, assemble it on a soft, non-abrasive surface
such as carpet or cardboard.
• Keep the receipt and these instructions for proof of purchase.
• Use 1 Type G50 Bulb (not included) 120V 60Hz AC Only
• Maximum suggested wattage: 60W
Option 1: For
Wall-Mounted/ Plug-in
Installation