Instructions / Assembly
30
Step 14
Problem
The bulb will not light.
The fuse blows or circuit
breaker blows when the light
is turned on.
Possible Causes
The bulb is burned out.
The power is o.
The circuit breaker is o.
There is an exposed wire.
Solutions
Replace the light bulb.
Ensure the power supply is on.
Ensure the circuit breaker is in the ON position.
Discontinue use of the light.
Contact a qualified electrician or reach out to
our Customer Happiness team at
help@nathanjames.com or 1-866-619-1004.
Troubleshooting
Last, but not least, secure
one bulb (not included) into
the Fixture (1) and hurray!
Assembly is complete! That
wasn’t so bad, was it?
We recommend using one A19
LED 60 Watt Equivalent bulb
(not included).
6
1