Use and Care Manual

Felix Coffee Table

PROPER CARE AND TREATMENT

We want your nightstand to last as long as possible, so we recommend that you tighten screws

within the first two weeks after assembly. For added safety, check the tightness of all screws every

two months.

Wood:

Avoid cleaning MDF (Medium-density fiberboard) material with water. When necessary, clean the

surface with a slightly wet cloth and immediately dry thoroughly. For that hard to remove residue,

use a small amount of mild soap. Do not use bleach.

Do not apply any wood treatment to the tabletop and drawer since these are made of MDF.

Steel:

Wipe up spills as they happen with a damp cloth and wipe dry. Avoid scraping or rubbing the steel

legs with an abrasive cloth that could damage or remove the powder-coating from the surface Do

not use cleaning solutions, chemical solvents, strong detergents, cleaners with bleach, or furniture

polish.

PVC Leather:

Look for a vinyl cleaner from your local hardware. Spray a light coat on the surface then wipe dry

with a towel. You can use a sponge soaked in water as an alternative.

PAGE 1
Felix Coffee Table PROPER CARE AND TREATMENT We want your nightstand to last as long as possible, so we recommend that you tighten screws within the first two weeks after assembly. For added safety, check the tightness of all screws every two months. Wood: Avoid cleaning MDF (Medium-density fiberboard) material with water. When necessary, clean the surface with a slightly wet cloth and immediately dry thoroughly. For that hard to remove residue, use a small amount of mild soap. Do not use bleach.