Use and Care Manual
PROPER CARE AND TREATMENT - NIGHTSTAND
We want your nightstand to last as long as possible, so we recommend that you tighten screws
within the first two weeks after assembly. For added safety, check the tightness of all screws
every two months.
MDF:
Avoid cleaning wood with water. When spills happen, clean surfaces with a slightly wet cloth
and immediately dry thoroughly. For that hard-to-remove residue, use a small amount of
chemical-free bleach with mild soap.
Metal:
Wipe up spills as they happen with a damp cloth and wipe dry. Avoid abrasive cleaning
solutions, chemical solvents, strong detergents, cleaners with bleach, or furniture polish.

