Let’s build the Jackson Floating Side Table 0 70 SEMBL Y A S M I N UT E 7 SKU 34106 Scan me! Free Lifetime Warranty 23-0329
Ok, let’s get rolling What’s included Description This should be easy, just follow our instructions and you will be back to Netflix in no time.
The goods IMPORTANT 1. Do not tighten bolts / screws completely until all bolts / screws are lined up and inserted into holes. 2. Do not over tighten screws and bolts to avoid stripping. 3. Please use hand tools to assemble this product. Do not use power tools.
What’s included Description Qty A M6*35mm Cam Bolt 16 B 15*9.
The goods A B F CL H C F D F CR I M K N 5 F DR J E DL G L
Step 1 Let’s get this thing fired up! Lay down the packaging carton or use carpet as a working surface. To start, screw the M6*35mm Cam Bolts (A) into the Top Panel (1), Left Side Panel (2), Right Side Panel (3), and Drawer Front (9).
Step 2 D D Attach the Drawer Left Side (10) and Drawer Right Side (11) to the Drawer Back (12) using the M4*30mm Screws (D). 12 11 D D 10 Step 3 To finish up the drawer, slide in the Drawer Bottom (13). Then attach the Drawer Front (9) using the M6*30mm Wooden Dowels (C). Once in place, use the 15*9.5mm Cam Locks (B) to secure. Finally, attach the Handle (N) using the M4*16mm Screw (M).
Step 4 Get those Drawer Sliders (F) out and let’s finish this drawer! Using the M3*12mm Screws (E) and the diagram below, align the DL and DR Drawer Sliders and secure in place.
Step 5 We know this graphic looks intense, but trust us, it’s easy! Secure the Left Side Panel Slider (F)(CL) and Right Side Panel Slider (F)(CR) to Left Side Panel (2) and Right Side Panel (3) using the M3*12mm Screws (E). Finally, add Wooden Dowels (C) to both Panels (2)(3).
Step 6 Next, insert Wooden Dowels (C) into the sides of the Back Stretcher (5). Then secure the Back Stretcher (5) to the Right Side Panel (3) and use the Cam Lock (B) to secure in place.
Step 7 Take the cabinet you’ve built so far from Step 6 and attach the Bottom Panel (4) using the Wooden Dowels (C). Once in place, secure using the Cam Locks (B), then place a PVC Sticker (K) over the top of the Cam Locks if you don’t want them to be visible.
Step 8 Attach the Left Side Panel (2) by repeating the process from Step 7, and continue placing the PVC Stickers (K) over the Cam Locks (B).
Step 9 You’re doing so well! So we decided to make this step super easy for you. Just slide in the Back Panel (6).
Step 10 Now attach the Top Panel (1) by aligning the holes in the Top Panel with the Wooden Dowels already placed in the cabinet sides in previous steps. Once in place, secure using the Cam Locks (B).
Step 11 Now turn around the cabinet and secure the French Cleat (7) pieces by lining up the Cam Bolts (A). Once in place, secure using the Cam Locks (B).
Step 12 Now reach into the back of the panel and secure the Back Stretcher (5) using the M4*30mm Screws (D).
Step 13: Using the Mounting Installation Template 17
Step 14: Non-drywall After using the Mounting Installation Template (L) to mark and pre-drill holes into your wall, press the NonDrywall Anchors (H) into the drilled holes. After the anchors are in place, secure the French Cleat for Wall (8) to the wall by inserting and tightening the M4*50mm Screws (G) through the Cleats and into the anchors. Wall See the next page (page 19) for more detailed instructions. If you’re mounting your table onto drywall, skip ahead to page 20 for instructions.
Step 14: Non-drywall (cont.
Step 14: Drywall After using the Mounting Installation Template (L) to mark and pre-drill holes into your wall, press the Drywall Anchors (I) into the drilled holes. After the anchors are in place, secure the French Cleat for Wall (8) to the wall by inserting and tightening the M4*70mm Screws (J) through the Cleats and into the anchors. Wall See the next page (page 21) for more detailed instructions. If you’re mounting your table onto non-drywall, skip back to page 18 for instructions.
Step 14: Drywall (cont.
Step 14: How to Use Drywall Anchors 22
Step 15 Now that the wall is prepped, line up the French Cleat for the Cabinet with the French Cleat for the Wall and set your floating side table on the wall.
Step 16 Before you start placing your chips and salsa on the tabletop, please finish securing the table to the wall using the M4*30mm Screws (D).
Step 17 You made it to the last step! We’re super proud of you, and that table is looking great! Now line up the drawer sliders and carefully push your drawer in.
No heartburn, when we handle the return Give us a call 1-866-619-1004 or shoot us a message at help@nathanjames.com we will issue you a free replacement with zero hassle. Our way Their way Give us a call Re-package item Replacement Schedule pick up You Track package Replacement You We really don’t want you to go through the hassle of re-packaging your item and sending it back, because let’s be honest…nobody has time for that.
Safety first, fun later We want your product to last as long as possible, so we recommend that you tighten the screws 2 weeks after assembly and for added safety check the tightness of all screws every 2 months. For proper care and treatment, please check our website at NathanJames.com/products Safe use of this product starts with you. Do not modify the structure of this product in any way. Use this product responsibly with the primary concern for your safety.
We are only in business if you’re happy For starters, thanks for being you. Toll-free at 1-866-619-1004 Help@nathanjames.com NathanJames.com/help We do our best to ensure your furniture arrives without any problems, but occasionally mistakes happen—as humans we are imperfect beings. In the event that a part is damaged or missing, we will be more than happy to provide you with replacement part(s) for free. Warranty This product comes with a lifetime warranty from the date of purchase.
