Use and Care Manual

18
After using the Mounting
Installation Template (L) to
mark and pre-drill holes into
your wall, press the Non-
Drywall Anchors (H) into the
drilled holes.
After the anchors are in place,
secure the French Cleat for
Wall (8) to the wall by inserting
and tightening the M4*50mm
Screws (G) through the Cleats
and into the anchors.
See the next page (page 19)
for more detailed instructions.
If you’re mounting your table
onto drywall, skip ahead to
page 20 for instructions.
Wall
Step 14: Non-drywall