Use and Care Manual

20
After using the Mounting
Installation Template (L) to
mark and pre-drill holes into
your wall, press the Drywall
Anchors (I) into the drilled
holes.
After the anchors are in place,
secure the French Cleat for
Wall (8) to the wall by inserting
and tightening the M4*70mm
Screws (J) through the Cleats
and into the anchors.
See the next page (page 21)
for more detailed instructions.
If you’re mounting your table
onto non-drywall, skip back to
page 18 for instructions.
Step 14: Drywall
Wall