Instructions / Assembly

Mark it

1/4” Drill bit

Phillips

screwdriver

All about the angle

Chose your desired location on the wall,

have your friend hold the bookcase in place and

use a pencil to mark where the anchor will go.

Move bookcase to the side and following the mark

you just made. With a 1/4” drill bit, drill 2 holes into

the wall.

Following the mark you just made. Using your phillips

head screw driver, screw the plastic anchors into the

holesuntiltheyareushtothewall.

If you’re feeling strong, just go ahead and push it in.

Insert 1 screw through each metal bracket

and into the drywall anchor. Tilt your phillips

head screwdriver, and secure but do not over

tighten.YOU’REALLDONE!TimeforNetix!