User's Manual

4
CardBus Enhanced Wireless Network Adapter
Adapter Installation
The adapter fits into a Type II or Type III CardBus slot, also known as a PCMCIA
or PC Card slot. The antenna is encased in a plastic case, in line with the main
body of the adapter, such that it extends outside the slot when the adapter is
inserted.
step1.
Insert the adapter into the computer’s CardBus slot. Insert the adapter
with its 68-pin connector facing the slot and the label facing up.
step2.
Repeat the above procedure for each of the other computers to be
networked.
LEDs
The adapter has two light-emitting diode (LED) indicators, one to indicate power
and one to indicate wireless activity. When you hold the adapter so the antenna
housing faces right like a capital letter D, the power LED is above the activity LED.
The power LED shines green whenever the adapter is receiving power; the activity
LED shines orange when the adapter is transmitting or receiving.